This is the upgrade/replacement battery for the ActionCamNX camera (820mah) This battery will now allow you to capture just over 2 hours of awesome HD video.
Battery can be changed by removing (2) screws on bottom, front of case, sliding and lifting cover off. Existing battery is stuck to the inside of case with double sided foam tape; unplug the 2 pin connector from the Printed Circuit Bd and remove battery. Assemble new battery by pealing liner from foam tape and locating in the same position as the battery just removed. Plug wires/connector into PCBd connector noting that it only plugs in one orientation. (Red wire closest to wall) Insure wires do not get pinched, re-assemble cover and screws.
Note: Do Not touch any other components on the Printed Circuit Bd and be careful to not transfer static electricity to the PCBd. (It is helpful to touch something metal before opening up the case so that you would disapte any charge you might have on your body)
Specs: 3.7v, 820mah, 2 pin polarized plug, LiPo battery
FREE shipping on orders over $100!